Separation
ZXG series rotary scraper suction mud machine
Date:2017-03-21 15:32:52 From: Browse times:
The hanging center drive mud scraper is mainly composed of the reducer drive mechanism, the power transmission shaft, the underwater bearing and the mud scraper, etc. the load of the whole mud scraper is fixed at the center of the working bridge which spans the pool diameter.
The diameter of water with raw water is to pool water distribution of radiation surrounding the overflow tank, with the flow rate decreased, suspended solids in water were separated and the settlement at the bottom of the pool, the drive and suspension components, by scraping sludge scraper will be set to the implementation of the mud collecting groove, relying on the static pressure tank or pump discharge outside.
Application and introduction:
ZXG hanging type central drive mud scraper, suitable for water supply and drainage works in the water plant or sewage treatment plant diameter is generally not more than 20m of radial flow (graphics) sedimentation tank sludge scraping and exclusion.
The products identified through the provincial science and Technology Commission, the Ministry of construction, Ministry of machinery Supervision Bureau recommended products.
Technical features:
Simple structure, easy maintenance and management.
Smooth operation, safe and reliable operation.
The effect of scraping sludge is good, and the sludge moisture content is low.
| Model | Applicable pool size（M） | Power（kw） | speed（m/min） | Scrape number | Load on both sides（KN） | Mounting dimensions（mm） | ||||
| ZXG-6 | 6 | 0.37-2.2 | Primary sedimentation tank | Two sedimentation tank | 19 | A | B | C | D | |
| ZXG-8 | 8 | 2-3 | 1.5-2.2 | 2 | 22 | 340 | 320 | 105 | 420 | |
| ZXG-8 | 8 | 24 | ||||||||
| ZXG-9 | 9 | 26 | ||||||||
| ZXG-10 | 10 | 29 | ||||||||
| ZXG-11 | 11 | 31 | ||||||||
| ZXG-12 | 12 | 34 | ||||||||
| ZXG-13 | 13 | 36 | ||||||||
| ZXG-14 | 14 | 39 | ||||||||
| ZXG-15 | 15 | 41 | ||||||||
| ZXG-16 | 16 | 44 | ||||||||
The height of H is determined by the construction unit or design department, suggested that the primary settling tank H is less than or equal to 4.4m, two sink the pond bottom slope is less than or equal to 4.5m, 1/10.
Special requirements according to user requirements design and manufacture.
Specify material, corrosion and electrical control requirements.
Previous：ZBG type rotary scraping and sucking machine
Next：
