Accessories
GS series grille decontamination machine
Date:2017-03-21 15:44:42 From: Browse times:
The GS series is a special shaped tooth grille decontamination machine is made of ABS engineering plastics, nylon 66, nylon 1010 or stainless steel, according to the order of assembly in the tooth axis, form a closed tooth chain, the lower part is installed in the inlet channel, the transmission system driven by the entire tooth chain (upstream face) then bottom-up movement, and carry solids separate from the liquid, the liquid from the gap in the tooth through the gate, the whole working process of continuous.
Schematic diagram：
Main technical parameters:| Model | GS-300 | GS-400 | GS-500 | GS-600 | GS-700 | GS-800 | GS-900 | GS-1000 | GS-1100 | GS-1200 | GS-1300 | GS-1400 | GS-1500 | ||
| Tooth pitch（mm） | 100或150 | ||||||||||||||
| L line speed | 约2m/min | ||||||||||||||
| Power（kw） | 0.37-0.75 | 1.1-2.2 | |||||||||||||
| Water depth（m） | 1.0 | ||||||||||||||
| Liquid velocityV(m/s) | 0.8 | ||||||||||||||
| Barrier（mm） | 1 | Gate flow（㎡/d） | 1780 | 3090 | 4390 | 5650 | 6960 | 8270 | 9470 | 10830 | 12140 | 13390 | 14700 | 16010 | 17260 |
| 3 | 3650 | 6030 | 8510 | 11290 | 13770 | 16240 | 18710 | 21340 | 23820 | 26290 | 28920 | 31400 | 34030 | ||
| 5 | 4450 | 7850 | 10720 | 14120 | 17260 | 20600 | 23800 | 36940 | 30080 | 33480 | 36620 | 40020 | 42900 | ||
| 10 | 5230 | 8890 | 12560 | 16220 | 19880 | 23020 | 27200 | 30870 | 34530 | 38190 | 41850 | 45510 | 49180 | ||
| 15 | 6975 | 12290 | 17615 | 22935 | 26750 | 33310 | 38015 | 43335 | 48625 | 53970 | 59290 | 64605 | 69060 | ||
| 20 | 8720 | 15690 | 22670 | 29640 | 36620 | 43600 | 48830 | 55800 | 62780 | 69750 | 76730 | 83700 | 88940 | ||
| 25 | 45640 | 51880 | 57980 | 65395 | 72805 | 80215 | 86320 | 92860 | |||||||
| 30 | 47080 | 54930 | 60160 | 68010 | 75860 | 83700 | 88940 | 96780 | |||||||
| 35 | 47955 | 55365 | 61470 | 72290 | 72290 | 85450 | 59810 | 98960 | |||||||
| 40 | 48830 | 55800 | 62780 | 76730 | 76730 | 87200 | 90680 | 90680 | |||||||
| 50 | 52320 | 56670 | 65390 | 78470 | 78470 | 91550 | 95910 | 95910 | |||||||
Compact structure, high degree of automation (can be controlled by the PLC microcomputer control system). Low energy consumption, low noise, high separation efficiency.
Continuous decontamination without clogging, slag clean.
Good corrosion resistance (all moving parts are stainless steel and nylon).
In the transmission system, the mechanical overload protection and overload limiter double protection. Instrument shell tide reproduction childish display rotation load, when the water under the chain or tooth is stuck, the motor will automatically power off, the instrument has remote monitoring interface, can realize remote monitoring of machine fault.
Ordering instructions:
Order should provide the channel width and channel depth, civil slag height, installation angle, tooth gap gate and other technical parameters.
Should be required to indicate the material, tooth rack.
The supporting electronic control box shall indicate the control mode.
The company has supporting equipment: belt conveyor, screw conveyor, screw press, slag car, when necessary, please specify.
Previous：WZL type shaftless screw conveyor
Next：
