Landscape water

        1 breathe dissolved oxygen - increase water dissolved oxygen, fresh, activation

        Simulation of the nature of the waterfall flow mode, according to the principle of oxygen transfer to improve the total oxygen content, in the process of reducing the thickness of the liquid film, accelerate the gas and liquid interface update, increase the atmosphere, the contact area of the liquid level. That is to say, the full flow subdivision, increasing the contact area between the water and air, the full aeration in the air, so that the water is rich in dissolved oxygen, while ammonia, carbon dioxide and other harmful gases from the surface overflow. Because oxidation reduction is an important role in the purification of water, the dissolved oxygen in the water can react with the pollutants, thus removing the harmful substances in the water. According to the water quality test, the dissolved oxygen in the treated water is kept saturated, and the water is fresh and activated

        2 hydraulic flotation removal of organic and inorganic substances in water

        By means of the function of respiration (i.e. aeration), a large amount of foam is produced. The reason for the bubble is soap and protein in the water as a foaming agent, that is, nitrogen, phosphorus, oil, protein, chlorophyll and anionic synthetic agent, etc.. When mixed with foam raw water to filter layer, the foam is lighter than water, so floating in the water above, equipment internal pressure minimum, the filtering layer is made of natural anti particle composite filter size, relatively large, not by the foam filter layer, can only float on the surface. When the bubble is getting long only by "breath pipe" discharge, or when the backwashing filter tank, foam with water washed away. This process makes a variety of organic and inorganic substances in the water cannon are thoroughly remove.

        3 gravity micro pressure fine filtration high efficiency of suspended solid particles

        The solid particles which are called "out" and "floating" can not be trapped in the fine filter layer of the principle of the seepage well, through the multi-layer anti composite natural filter material. The particle size of the filter layer is consistent with that of the raw water. Because of the characteristics of the hierarchical filtration, the removal rate of bacteria can reach more than 90%. It is well known that the particle size of E. coli is 0.5u, in other words, all the particles above 0.5u can be removed effectively by 0.5u.

        4 disinfection and disinfection of chlorine water to kill residual bacteria in water, improve water body's immunity

        The so-called immune function of water, the water must contain a trace of long acting bactericidal factor 0.30.5mg/L residual chlorine. It can effectively prevent water bacteria and virus reproduction growth of algae and algae containing spores, the bactericidal factor called the immunity of the water, it is essential to ensure that the water quality is not bad.

        5 automatic discharge function - discharge intercepted surface interception impurities

        The raw water through the filter layer, impurities in the water is blocked and filter resistance increases, causing the water level to rise, when the water level rises to a certain height, according to the principle of fluid mechanics, automatic discharge automatic flushing and automatic recovery filter, filter arrangement to reset. Flushing intensity 32L/m2.s, flushing time of 2min, to reach the filtered water quality (turbidity), <0.14mg/L